How to Connect Your Orbi Router to a New Modem


The simple method of connect Orbi router to new modem guarantees the best possible internet coverage and performance across your house.

  • Disconnect any existing cords and remove your modem from the power source to get started.

  • Use an Ethernet cable to connect the modem to the WAN port on the Orbi router.

  •  It can take a few minutes for the modem to fully power up so plug it in again.

  • When the modem is prepared plug your Orbi router into a power outlet to turn it on.

  •  A steady white or blue light will signal that the router is taking a few seconds to power up.

  • Next set up using the Orbi online interface or app.

  • On your smartphone download the Orbi app then follow the on-screen directions.

  • Go to http://orbilogin.com or http://192.168.1.1 after connecting your computer or mobile device to the Orbi network using an Ethernet connection or Wi-Fi if you prefer a browser-based setup.

  •  You will be guided through the procedure via the Orbi setup wizard which will include setting up your password and network name (SSID).

  • Enter the internet connection parameters that your internet service provider (ISP) has supplied such as a PPPoE username and password if necessary.

  • Once the setup is complete, position the Orbi satellites in strategic locations throughout your house for optimal coverage then hit the Sync button on both devices to sync them with the router.

  • Look for a steady blue light on the satellites to confirm the connection.

  • Lastly, make sure everything is working properly by testing your internet speed.

If you still have questions go to our website.
Location: United States

Comments

Post a Comment

Popular posts from this blog

OrbiLogin Essentials: Tips for Smooth Router Management

Image
You may control and modify your network settings by logging into your Orbilogin equipment. To assist you with the procedure consider the following brief guide:   A PC smartphone or tablet should all be linked to your Orbilogin network. To access the router's interface you must have this connection. Open a web browser like Firefox Chrome or Safari. Press Enter after typing either orbilogin.com or orbilogin.net into the address bar. Alternatively 192.168.1.1 the default IP address can be used. The Orbi login page will be displayed to you. Put in your password and username as usual. Unless these credentials were altered during the original setup "admin" is the default username and "password" is the default password. After successfully logging in you will have access to the Orbi router's dashboard. You can change a variety of options here including your WiFi name (SSID) password security settings and firmware upgrades. You can also set up additional features suc...
Read more

How to Setup the Orbi Router?

Image
T o know how to setup orbi router starts with unpacking the router and satellite modules and placing them where they will provide the optimum coverage.  Verify that they are turned on and then wait for a while for the status LEDs to stabilise. Connect the Orbi router to your modem using the Ethernet cable that comes with it. Once connected, keep an eye out for the router's solid internet LEDs to indicate that an internet connection has been established. Next connect your computer or mobile device to the Orbi network using the default network name (SSID) and password that are provided on the router's label.  As an alternative you can set up the network with instructions using the Orbi app. Launch a web browser and enter the default Orbi login IP address either http://192.168.1.1 or http:/orbilogin.com . You can use the Orbi app or the on-screen instructions to complete the setup process. This entails configuring your wireless network's settings (password and SSID) and poss...
Read more

What to Do When Your Orbi Router Displays a Purple Light

Image
  The presence of orbi router purple light usually means that the device is having trouble connecting. This hue indicates that a suitable internet connection cannot be established by the router. When the router is first turned on or when it reboots and is unable to establish an internet connection the purple light frequently shows. There are a number of possible causes for this including modem malfunctions, improper setup or troubles with the internet service provider (ISP). Users should first make sure their modem is correctly connected to the Orbi router in order to fix the purple light problem. By reestablishing the connection, restarting the modem and router frequently fixes the problem. Additionally make sure the Ethernet wire that connects the modem to the router is plugged in firmly and undamaged. Users should also make sure there are no interruptions or outages with their ISP. Checking the router's settings or doing a factory reset could be required if the issue still exis...
Read more